Detailed Product Description

Cummins  Generator

1) Cummins engine model 6BT5.9G2 powered

2) Alternator: Engga model EG225L-80N

3) Prime power:100KVA/80kw,standby power:110KVA/88KW

4) Turbocharged,water-cooled

5) Auto/key start

Electrical Specifications of diesel generator

1) Power Factor: 0.8 Lagging

2) 3 Phase 4 Wire

3) Insulation: Class H

4) Brushless

5) Self-Excited

6) IP22 Protection

7) AVR regulation

8) Starting by Battery

Special Specifications

1. Frequency: 50Hz

2. 3 Phase 4 Wire/ 1 phase 2 wire

3. Speed: 1500RPM

4. Three Phase Voltage Available: 115V /127V /200V / 220V / 230V / 240V / 380V/ 400V / 415V

Single Phase Voltage Available: 100-250V

Manufacturing Standards:

ISO8528; ISO1105; ISO3046; GB/T2820; GB755; BS5000; NEMAMG-22; YD/T502

SCOPE OF SUPPLY

1. DIESEL ENGINE

1.1 Engine which includes wet type cylinder, direct injection combustion chamber, exhaust turbocharger, water cooling, electronic governor, etc.

1.2 Fuel system, which includes, fuel pump, strainers or filters, etc.

1.3 Air intake and exhaust system, which includes air filter, exhaust silencer, bellow, all intake and exhaust piping, cablings, instruments, valves and settings, etc.

1.4 Cooling system, which includes radiator with water level alarm and indicator, thermostatic switch, thermostatic heater, engine shaft mounted fan, all interconnecting piping, cablings, instruments, valves and settings, etc.

1.5 Lubricating system includes pumps, oil sumps, oil strainers and filters, all interconnecting piping, instruments, valves and settings, etc.

1.6 Starting system, which includes 2 sets of batteries, a set of AC charger, and interconnecting piping, cablings, instrument, valves and settings, etc.

2. AC SYNCHRONOUS GENERATOR

 2.1 Generator, which includes exciter, rectifier, AVR, shaft mounted fan if required.

 2.2 All interconnecting piping, cablings, instruments, valves and settings, etc.

3. COUPLINGS AND GUARD

 3.1 Coupling

 3.2 Coupling Guard

4. CONTROL PANEL

 4.1 Local automatic control panel

5. BASEPLATE

 5.1 Common base plate

6. DOCUMENTS

 6.1 Generator Set Installation Manual

 6.2 Generator Set Operation and Maintenance Manual

 6.3 Generator Set Control Panel Manual

 6.4 Engine Manual and Quality File

 6.5 Alternator Manual and Quality File

 6.6 Factory Acceptant Test Report

 6.7 Relative Drawings and Diagrams

INSPECTION AND TEST

1 GENERAL

1.1 Each engine shall be tested at manufacturers workshop to certify the engine output and fuel consumption in accordance with the site operating condition specified by purchaser on the specification datasheet.

1.2 All relevant information drawings pertinent to the testing and test procedure shall be transmitted to the purchaser in advance of the test date notification.

1.3 The purchaser shall call for additional testing if test results are unsatisfactory or marginal. Any equipment rejected shall be repaired or replaced to the purchasers satisfaction and tests shall be repeated.

1.4 Any unsatisfactory material, equipment, installation, or workmanship shall be replaced or repaired to the purchasers satisfaction at the manufacturers cost.

1.5 The engine and generator shall be tested individually in accordance with relevant standards specified above.

1.6 The completed and individually tested engine and generator shall be assembled onto the baseplate with all auxiliaries, instruments and controls for a complete test of the generator set.

OEM Service:

Shunhengxin Diesel Gensets Co., Ltd. Can provide professional OEM Service for customers.

1. Unique design and manufacture of generator according to customers requirement.

2. Customer logo printing or painting on the genset.

3. Installation and Operation manual neutral or headings can be design according to customer requirement.

4. Full warranty cover to support the customers customers. 

Why Cummins powered gensets?

1. Cummins engines which are made in China with the same standard of the US Cummins keep the quality almost the same as the US Cummins.

2. More than 90% of the Engines components and spares are made in China which keeps the cost much lower.

3. Cummins engines are universally just as Cummins factories all around the world; all the spares are universal which make the maintenance and reparation very simple.

4. Cummins has worldwide after-sales network, to whom you can get technical support and spares right near your house.

5. Engineers are more familiar with Cummins engines because they are most wildly use in every filed and everywhere around the world.

Introduction of Shunhengxin Diesel Gensets Co., Ltd.

Shunhengxin Diesel Gensets Co., Ltd has more than a decades experience in manufacturing and maintenance of generator sets.

We mainly manufacture Cummins, Deutz and Perkins powered gensets which are all made in China keeps the genset cost much lower than the US or EU or the Japan cost, since the design and all the materials are the same with original factories, the quality remains the almost the same as the original factories.

Now Shunhengxin Diesel Gensets Co., Ltd. Product line covers

1. Open type gensets.

2. Silent type gensets.

3. Trailer mounted gensets.

4. Fuel tanks

5. Industrial Silencers & other genset accessories.

Invitation to visit our factory

1. If you are interested in our products we sincerely invite you to take a visit of our factory when you are in China.

2. Our factory locates in Foshan City, which is famous for its ceramics, is just 45 minutes away from Guangzhou, and 35 minutes away from Cantonfair.

3. When you come to Guangzhou or Cantonfair, we can send cars to pick you up and take you to our factory.

4. In the factory we can discuss more about the cooperation and we will listen to your requirements.